Emergency Exit Terminal
for Interlock Control Systems
Kenmerken
The DICTATOR interlock control system provides a terminal designed especially for doors in emergency exits. These doors are equipped both with the normal control terminal and an additional emergency exit terminal.
This terminal only serves for unlocking the door in an emergency. Normally the interlock door is operated by the control terminal (without emergency-open switch).
The emergency exit terminal has been tested by the German TÜV Thüringen and is approved for its use on emergency exit doors (German standard for electrical locking systems on emergency exits EltVTR), certificate no. P-3250/08. For an easy mounting boxes for flush and surface mounting are available.
Productinformatie
Technical Data
| Power consumption | 24 VDC, approx. 80 mA |
| IP rating | IP 20 |
| Operating temperature | -10 °C to +40 °C |
| Emergency-open contact set (capacity) | 2 NC contacts: 2,8 A |
| Input signal from hazard alert system | NC contact |
| Output to signal (horn etc.) | 24 VDC, max. 1,4 A |
Functioning
The emergency-open switch of the emergency exit terminal permits to unlock the door of the interlock system in case of an emergency. The used locking device has to be an approved one (see DICTATOR bar magnets here or electric strikes here). The power supply of the connected bar magnet is interrupted and the door unlocked.
The emergency exit terminal is provided with contacts for an external signal (siren, lamp, horn), even supplying a power of up to max. 1.4 A for the signal. (ATTENTION: this power consumption has to be taken into account when calculating the required performance of the power pack).
The emergency-open command can also be given directly by a facility management centre. This, however, requires that the system is configured for the global emergency-open.
The door status is indicated by the two lamps on the terminal:
Red LED on: Door is locked electrically.
Green LED on: Door is released.
Switching Device
After an emergency unlocking the door has to be locked again by a separate switching device within splitting distance of the door like for instance the loose-key switch with stainless steel front plate (AISI 304), part no. 710960 (see tab Dimensions).
The half profile cylinder (according to DIN 18252) has to be provided by the customer.
Dimensions
All dimensions in mm
Emergency exit terminal
Part no. 710833
Loose-key switch
for relocking the door after an emergency-opening.
Without profile cylinder!
Part no. 710960 (switching capacity max. 4 A, 30 VDC)
Bestelinformatie
| Omschrijving | Artikelnr. |
|---|---|
| Sealable cover shed for emergency open button | 710839 |
| Surface box P for the emergency exit terminal of the interlock control system, powder coated white, RAL 9010 | 710835 |
| Flush box P for the emergency exit terminal of the interlock control system, model for metal profiles | 710834 |
| Surface box P for the control/operating terminal, powder coated white-aluminium, RAL 9006 | 710832 |
| Surface box P for the control/operating terminal, powder coated white, RAL 9010 | 710831 |
| Flush box P for the control/operating terminal of the interlock control system, model for metal profiles | 710829 |
Downloads
| File Name | Type | Date of modification |
|---|---|---|
| Catalog Additional Components | 2016/04/12 | |
| Questionnaire Door Interlock System | 2020/03/24 | |
| Technical manual Connection of Doors in Emergency Exits for Peripheral System | 2017/08/12 | |
| Technical Manual Connection of Doors in Emergency Exits for Central System | 2016/06/10 | |
| STEP Emergency exit terminal FT P, 710833 | stp | 2015/02/02 |
| STEP Loose-key switch emergency exit terminal | stp | 2015/02/02 |