Bar Magnet FH300U35K
2000 N Holding Force, Flush Mounting
Kenmerken
The bar magnet FH300U35Kis generally supplied with an integrated Hall sensor as door locking / interlock control systems require feedback on the locking status of the door. It is tested according to the German EltVTR for use on doors in escape routes. It is only 35.5 mm wide and therefore ideal for confined spaces.
The housing of the bar magnet FH300U35K is made of stainless steel, the counter plate of zinc-plated steel. In addition to two separate mounting plates, the scope of delivery includes two attachment screws of different lengths to fasten the magnet from behind.
Tested according to EltVTR. Approved together with the emergency exit terminal of the interlock control system (certificate P-3250/08).
Productinformatie
Technical data
Voltage | 12 VDC ± 10 % | 24 VDC ± 10 % |
Power consumption | 480 mA | 240 mA |
Holding force | 2000 N | |
Duty cycle | 100 % | |
Operating temperature | -15 °C to +55 °C | |
Remanence | 0 N (due to release pin) | |
Material magnet | body AISI 304, magnetic surface zinc-plated steel | |
Material counter plate | zinc-plated steel | |
IP rating | IP 54 | |
Feedback contact | Hall sensor (changeover, 24 VDC/2 A) | |
LED indication light | none | |
Electrical connection | approx. 150 mm cable with connection board |
Bestelinformatie
Omschrijving | Artikelnr. |
---|---|
FH300U35K bar magnet, narrow type, for flush installation, with feed-back contact, LED and counter plate | 040284SET |